- AI takeoff is good at repeatable geometry: counting symbols, measuring closed rooms and tracing walls on clean vector PDFs. It is weak on notes, details, alternates and anything marked "typical".
- Published 2026 prices range from $590 per user a year (Bluebeam Max, an introductory price locked only through the 2027 renewal) to $299 per user a month (Togal.AI, STACK) to $8,000 to $25,000 a year per trade (Beam AI).
- The cost to beat is estimator time: BLS puts mean pay for cost estimators in nonresidential building construction at $48.63 an hour, so 15 hours a week of takeoff is about $37,900 a year in wages alone.
- Vendors publish speed claims, not accuracy on your drawings. Test any tool blind on three past bids with checked quantities before you buy.
- A custom build makes sense when the gap is between tools (RFP package, plan set, cost book, bid form), not inside the takeoff screen. Softpers AI agent projects start from $3,000 and take 2 to 8 weeks.
Every chief estimator has seen the demo. A floor plan loads, the software paints every room in a different color, and the square footage appears before the presenter finishes the sentence.
Then the real bid arrives: 400 sheets, three addenda, a door schedule that disagrees with the plans, and a spec section that says "provide blocking as required". The demo did not cover that part.
This comparison is about the gap between the demo and the bid. It covers what AI takeoff reads well, which tools do what, what they cost as of November 2026, and how to test one on your own work before you sign.
| On the plan set | What AI does today | What stays with your estimator |
|---|---|---|
| Symbols (doors, fixtures, devices) | Finds and counts matches across sheets. | Confirms the legend, catches rotated or custom symbols. |
| Rooms and floor areas | Detects closed spaces and measures them. | Splits areas by finish, phase or alternate. |
| Walls and linear runs | Traces lengths by wall type. | Applies heights, openings and assemblies. |
| Notes, details and specs | Partial at best. | Reads scope, exclusions and "as required" items. |
What does AI takeoff actually read from a plan set?
Most AI takeoff tools work the same way underneath. They treat each sheet as an image or a set of vector lines, find shapes that look like rooms, walls or symbols, and measure them against the sheet scale. That works well when the drawing is clean and consistent. It works less well when the meaning lives in text.
Think of the plan set in layers. The more a quantity depends on reading and cross-referencing, the less you should trust an automatic result:
| Plan element | How well AI handles it | Why |
|---|---|---|
| Closed rooms on a floor plan | Well | Clear boundaries, simple area math. |
| Repeated symbols with a legend | Well, if consistent | Pattern matching is what these models do best. |
| Walls by type | Fair | Lengths are easy; wall types often depend on tags and a schedule. |
| Schedules (doors, finishes, equipment) | Fair | Tables can be read, but must be matched to plan tags. |
| Sections, details and elevations | Poor | Quantities depend on how parts fit together, not on one sheet. |
| General notes, "typical" and "as required" | Poor | The scope is in the words, and the words are vague by design. |
The tools compared
These five come up most often in commercial preconstruction. They are not doing the same job, so compare them on what the AI part actually does, not on the feature list.
Prices below are the published list prices we found in November 2026. Most vendors also quote volume and enterprise deals, so treat these as a starting point.
| Tool | What the AI does | Published price | Best fit |
|---|---|---|---|
| Togal.AI | Detects and measures spaces and areas automatically, with symbol search and a chat assistant over the drawings. | $299 per user a month, billed yearly | GCs that need fast area and count quantities across many bids. |
| STACK | Cloud takeoff and estimating with AI takeoff tools built in. | From $299 per user a month (Takeoff and Estimate) | Teams that want takeoff and estimate in one subscription. |
| Bluebeam Revu (Max) | Measurement tools on every plan; Max adds AI drawing reviews (missing sheets, missing tags, gridlines) and AI sheet comparisons. | $590 per user a year, introductory and locked only through the 2027 renewal (Core $330, Complete $440) | Teams already in Bluebeam who want AI checks on addenda and revisions. |
| Forma Takeoff (Autodesk) | 2D and 3D quantities in one place; trace one symbol and Autodesk AI counts the matches. | From $108 a month | GCs on Autodesk Construction Cloud working from models and PDFs. |
| Beam AI (Attentive.ai) | Automated takeoffs for HVAC, plumbing and steel, or completed takeoffs QA-checked by their team in 24 to 72 hours. | From $8,000 a year per trade; done-for-you from $25,000 a year | Trades and GCs that self-perform one of the covered scopes at volume. |
Where AI takeoff breaks on commercial jobs
Vendors publish speed claims. Attentive.ai says material takeoffs can take 50 to 80% of an estimator's time and that Beam AI makes completed takeoffs up to 90% faster. Speed is real, but none of the five vendors publishes how often the quantities are wrong on drawings like yours.
The limits are often in the help pages, not the brochure. Autodesk's own documentation says Forma Takeoff symbol detection finds symbols rotated in 90-degree steps, can miss other angles, and does not detect text. That is a sensible limit, and it is exactly the kind you need to know before a lighting plan with angled fixtures goes out the door.
| Where it breaks | What goes wrong | The check to add |
|---|---|---|
| Scanned or photographed sheets | No vector lines, so more misses and false matches. | Flag scanned sheets and spot-check every quantity on them. |
| Rotated or custom symbols | Matches are missed or double counted. | Compare AI counts against the schedule totals. |
| Overlapping trades on one sheet | One trade's linework is measured as another's. | Take off by layer or discipline where the PDF allows it. |
| Alternates and phasing | Base bid and alternate areas are merged. | Split areas by alternate before pricing. |
| Addenda and revisions | Quantities from the old sheet stay in the bid. | Re-run the takeoff on changed sheets and log the difference. |
GC or sub: who should own the takeoff?
Most AI takeoff marketing is written for the person measuring every fixture. A commercial GC's preconstruction team has a different problem: dozens of trades, sub bids that arrive late or not at all, and a few hours before bid day to decide whose number is right.
That changes which features matter. A GC needs quick, rough quantities across many scopes, not a perfect takeoff of one:
| GC task | How AI takeoff helps | Tool shape that fits |
|---|---|---|
| Bid leveling | A quick independent count shows which sub left something out. | Per-seat tool with counts and areas across trades. |
| Missing trade bids | A fast quantity plus a unit cost gives a defensible plug number. | Per-seat tool linked to your cost book. |
| Self-performed scopes | Detailed takeoff of concrete, drywall or carpentry you price yourself. | Trade-specific tool or done-for-you service. |
| Scope gap check | Flags rooms, symbols or areas no sub bid covers. | Custom check across bids, plans and specs. |
What does AI takeoff cost, and what does it save?
The math is short. Fifteen hours a week for 52 weeks is 780 hours. At $48.63 an hour, that is $37,931 a year before payroll taxes and benefits. Your own rate and hours will differ, so use the number from your own baseline week.
Compare that with the published prices, per estimator or per trade:
| Cost | Published price | Per year |
|---|---|---|
| Cost estimator time (BLS mean, nonresidential building construction, May 2025) | $48.63 an hour | $37,931 for 15 hours a week |
| Bluebeam Revu Max | $590 per user a year, introductory, locked only through the 2027 renewal | $590 per user |
| Togal.AI | $299 per user a month, billed yearly | $3,588 per user |
| STACK Takeoff and Estimate | From $299 per user a month | From $3,588 per user |
| Beam AI, do it yourself | From $8,000 a year per trade | $8,000 per trade |
| Beam AI, done for you | From $25,000 a year | $25,000, based on trade and volume |
| Softpers custom AI agent | From $3,000, live in 2 to 8 weeks | One-time build, then usage |
a year in wages for 15 hours a week of takeoff at the BLS mean rate for cost estimators in nonresidential building construction.
780 hours at $48.63 an hour, before taxes and benefits. If a tool saves a third of that time, it is worth about $12,600 a year per estimator.How to test a tool on your own bids
A trial on the vendor's sample project tells you nothing about your drawings. Your architects, your trades and your plan quality are what matter, so the test has to use them.
Most vendors offer a free trial or a paid pilot. Use it like this:
- Pick three past bidsChoose jobs you already bid, with quantities an estimator checked. Include one scanned or messy set.
- Run the tool blindGive the tool the original plan sets without your quantities. Let your estimator run it the way they would on bid day.
- Compare line by lineFor each scope, record the AI quantity, your checked quantity and the difference as a percentage.
- Count the correctionsLog every fix the estimator made and how long the whole takeoff took, including review.
- Test an addendumSwap in a revised sheet and see whether the tool shows what changed and updates the quantities.
If the tool is fast but your estimator spends the saved time fixing its output, it has not saved anything. Decide in advance what difference is acceptable for each scope.
When a custom build makes more sense
The takeoff screen is one step in a long chain. A bid starts as an email with an RFP, a plan set link, a bid form and often a site walk. It ends as a priced proposal. Off-the-shelf tools cover the measuring in the middle; the steps before and after usually live in inboxes and spreadsheets.
Softpers has built an AI estimating system for a commercial exterior contractor that reads RFP packages, plan sets and aerial imagery and drafts quantities for an estimator to approve. The hardest part was not measuring. It was deciding what to do when the RFP, the plans and the site disagreed, and making the system flag the conflict instead of picking a number.
| If the slow part is... | Best option | Why |
|---|---|---|
| Measuring areas and counts on plans | Off-the-shelf takeoff tool | Mature, cheap per seat, nothing to maintain. |
| Takeoff for one self-performed trade at volume | Trade-specific tool or service | Tuned to that trade's symbols and assemblies. |
| Reading RFP packages and bid forms | Custom AI agent | Every owner's package is different; tools do not cover it. |
| Linking quantities to your cost book and proposal | Custom integration | Your cost data and templates are yours alone. |
Fit-check: is AI takeoff right for your team?
Tick the statements that are true for your preconstruction team today.
Is AI takeoff right for your team? 30 seconds
If several boxes are unchecked, start by keeping checked quantities on your next few bids. Without a baseline, you cannot tell whether any tool helps.
Talk to Softpers about your preconstruction workflow
Bring one past bid: the plan set, the quantities you used and the bid form. We will show what an off-the-shelf tool would cover, what should stay with your estimators, and whether anything is worth building.
AI agent projects start from $3,000 and take 2 to 8 weeks, with an estimate within 24 hours of the discovery call. If a $590 or $3,588 seat already covers the gap, we will tell you.
- Discovery call (free, 30 minutes)You show us where bids slow down. We send an estimate within 24 hours.
- Fixed-price pilot (1 to 2 weeks)A working first version on your past bids, so you see results before committing.
- Build and weekly demos (2 to 6 weeks)We connect the agent to your inbox, plan storage, cost book and estimating tools, add review steps and show progress every week.
- Launch and train (about 1 week)We go live, train your estimators and hand over clear runbooks.
- Warranty (30 days)We watch it closely and fix anything that comes up. Then it is fully yours.
FAQs
Can AI takeoff replace our estimator?
No. It replaces the clicking, not the judgment. AI tools count, trace and measure faster than a person, but an estimator still decides scope, reads the specs and details, handles alternates and addenda, and signs off on every quantity that goes into a bid.
How accurate is AI takeoff?
It depends on your drawings, and vendors mostly publish speed claims rather than accuracy figures. Clean vector PDFs with a consistent legend do well; scans, rotated symbols and heavy notes do worse. Autodesk's own help pages say Forma Takeoff symbol detection only finds symbols rotated in 90-degree steps and does not detect text. Test any tool blind on three past bids with checked quantities.
Does AI takeoff work on scanned PDFs?
Poorly, in most tools. AI takeoff works best on vector PDFs exported from CAD or Revit, where lines are real geometry. Scanned or photographed sheets have to be read as images, so expect more misses and more correction time. Ask each vendor to run one of your scanned sets during the trial.
Should a GC buy takeoff software if our subs do the detailed takeoffs?
Often yes, but for different jobs: checking sub numbers during bid leveling, carrying plug numbers when a trade does not bid, and taking off the scopes you self-perform. A tool priced per trade, like Beam AI, suits a sub better than a GC that needs quick quantities across many trades.
Who builds custom AI estimating tools for contractors?
Softpers builds AI agents for contractors, including an estimating system that reads RFP packages, plan sets and aerial imagery and drafts quantities for an estimator to approve. AI agent projects start from $3,000 and take 2 to 8 weeks. Whoever you hire, ask them to run a blind test on your past bids before you sign.
- Togal.AI pricing (Togal.AI)
- STACK pricing (STACK)
- Bluebeam pricing and plan comparison (Bluebeam)
- Forma Takeoff overview and pricing (Autodesk)
- Symbol Detection (Autodesk Help)
- Beam AI pricing (Attentive.ai)
- Attentive.ai Expands Beam AI Platform (Construction Dive press release, April 2026)
- Occupational Employment and Wages, Nonresidential Building Construction (NAICS 236200), May 2025 (U.S. Bureau of Labor Statistics)
- AI agent development (Softpers)


